Is rfxcom transmitter able to control PowerMid

This is a new section created to share our home automation discussions with people from other countries.

Is rfxcom transmitter able to control PowerMid

Messagede Sp4rKy » 10 Mar 2008, 09:38

Hi,

PowerMid product has both IR receivers and transmitters. They communicate each with other through 433MHz radiofréquency.

So, do you think it may be possible to record signals and transmit them to the PowerMid IR transmitter ?
Sp4rKy
Modérateur
 
Messages: 377
Inscription: 09 Déc 2007, 16:19
Localisation: Rennes

Messagede b_weijenberg » 10 Mar 2008, 14:56

The RFXCOM transmitter can not transmit data for the PowerMid.
b_weijenberg
P'tit Guru de domotique
 
Messages: 74
Inscription: 05 Déc 2006, 17:59
Localisation: The Netherlands

Messagede DaRkYoda » 10 Mar 2008, 15:11

b_weijenberg a écrit:The RFXCOM transmitter can not transmit data for the PowerMid.


Are you trying to do it or it's impossible to do ?
Avatar de l’utilisateur
DaRkYoda
Dieu de domotique
 
Messages: 1282
Inscription: 22 Déc 2006, 17:15
Localisation: Clermont-Fd

Messagede b_weijenberg » 10 Mar 2008, 15:24

It is not possible because the IR signals are modulated signals and the transmitter can only xmit On-Off-Keying signals.
b_weijenberg
P'tit Guru de domotique
 
Messages: 74
Inscription: 05 Déc 2006, 17:59
Localisation: The Netherlands

Messagede DaRkYoda » 10 Mar 2008, 15:57

b_weijenberg a écrit:It is not possible because the IR signals are modulated signals and the transmitter can only xmit On-Off-Keying signals.


But the transmission between Powermid XL transmitter and receiver is 433Mhz AM, does this signal only reproduce IR signal or it's a protocole to trasmit between Powermid and it's not modulated ?
Avatar de l’utilisateur
DaRkYoda
Dieu de domotique
 
Messages: 1282
Inscription: 22 Déc 2006, 17:15
Localisation: Clermont-Fd

Re:

Messagede oliv06 » 03 Avr 2013, 17:04

DaRkYoda a écrit:
b_weijenberg a écrit:It is not possible because the IR signals are modulated signals and the transmitter can only xmit On-Off-Keying signals.


But the transmission between Powermid XL transmitter and receiver is 433Mhz AM, does this signal only reproduce IR signal or it's a protocole to trasmit between Powermid and it's not modulated ?

I have seen that it is the pronto protocol, and there is an open source project ( NetHomeServer PowerMid Connection ) implementing it using the CUL hardware
Perheaps it would be possible to implement it on the RFXTRX ?
Olivier
http://play.with.free.fr
Serveur Domotique: FHEM sur Dockstar avec RFXtrx433 : Oregon, Chacon, OWL, casto - Consommation électrique : Téléinfo USB sur FHEM et emoncms - Misc : squeezebox, Freebox, XBMC ...
Avatar de l’utilisateur
oliv06
Guru de domotique
 
Messages: 133
Inscription: 16 Mai 2012, 15:52
Localisation: Alpes Maritimes (06)

Re: Is rfxcom transmitter able to control PowerMid

Messagede BlueLotus123 » 16 Déc 2013, 12:02

I don't think there are recording options with the PowerMid product. In my previous office we were using the PowerMid product for communication, and I didn't remember we did make use of the recorder ever. I would suggest try with the technical support team too.



____________________________________________
Ellery
Invalid XML error message troubleshooting
BlueLotus123
Membre un peu timide !
 
Messages: 6
Inscription: 25 Nov 2013, 09:28


Retourner vers Welcome

Qui est en ligne

Utilisateurs parcourant ce forum: Aucun utilisateur enregistré et 2 invités

Copyright © 2011 - Touteladomotique.com - Tous droits réservés
Les blogs partenaires : Abavala, Domo-Blog, Domotique34, Maison et Domotique